Free Download BMW ICOM Next Firmware 1.44

Available with BMW ICOM firmware update with latest ISTA, I’m posting here the images for both ICOM A2 and original Next firmware.
Upload via x.x.x.x:60080 url.

https://mega.nz/folder/qy5EmZwK#-cqyZ6fFpS-EyUvDzOVP_Q

including ICOM A2 and ICOM Next

ICOM applicationImage 01.44.00

ICOM BootImage 01.28.00

ICOM Next app 010108

ICOM Next rootfs 010106

How to update BMW ICOM firmware V1.44?

1.  Download BMW ICOM V1.44 firmware update file
*   Please connect BMW ICOM A2 with computer using internet cable, power ICOM by 12V power adapter or from 1x DLC
*   Unzip ICOM FW v1.44 upgrade files.
*   Open IE Internet Explorer, enter address http://169.254.33.45:60080/ if you update Perfect version BMW ICOM, log in with

username: root

password: NZY1150263
PS: to upgrade common version ICOM A2 A1, browse http://169.254.92.38:60080/  and the next steps are the same.

2.   Click “Update Firmware”, you will see ICOM firmware version information.

3.   Click “Browse” to select file “ICOM-BootImage-01-28-00.bin”, set image type as “SYSTEM”, click “Send the file”.
4.   When it pops up “Write the image file to the flash?”, click “Yes”, then ICOM indicator light will turn red.
5.   When it pops up “The SYSTEM IMAGE update was successful”, click “Update Firmware”.
6.   Choose “ICOM-ApplicationImage-01-44-00.bin”, set image type as “APPLICATION”, click “Send the file”, it will spend several minutes since the file is a little bit large.
7.   When it pops up “Write the image file to the flash?” click “Yes”, then the ICOM indicator light will turn red for the second times.
8.   When it finish upgrading, click “reboot”.
9.   Click “Home” – “Update Firmware”, you will find ICOM A2 firmware update to the newest version:
10.   Current SYSTEM IMAGE version: 01.28.00
11.   Current APPLICATION IMAGE version: 01.44.00

Additional Note:
Please be sure your computer is to obtain IP address automatically.

Have fun!

BMW ICOM A2 NEXT WiFi Connection method

     1. Set the router to

      User name: ISAP

     Password: 12345678

2. Connect your computer to the router
3. The device is powered on and can be used after long WLAN light

 

If you want to set your device’s WIFI account password, please follow the following steps:

1. Connect the BMW ICOM to the car and connect the computer through the network cable
2. running “IToolRadar”

3. Record the current IP address

4. Open Internet explorer and enter the IP address just recorded (ip+ :58000)

5. Go to WLAN Settings

Enter account in SSID and password in pre-shared Key

6. Click Save Changes
7. Then restart the device and it can be used normally.

Bmw Icom A2 interface

Topic:
I have recently bought the new BMW Diagnostic Tool Icom A2 interface with Isid 3.1, Ista/d 2.36 and Ista/p 2.49.2 software and i would like to ask if anyone knows if it’s possible to connect wireless to the car’s obd without the LAN cable since it support’s WLAN option or what else needed to make it possible? The Icom A2 interface is a clone.
Replied by shawnsheridan
I don’t think any of the A1 ICOM Clones had WLAN card inside, and I would be surprised if A2 ICOM Clone did. If it does, I am pretty sure you need a special Access Point connected to ISIS Server to use WLAN mode.
Replied by TroyE60
Thanks mate for your answer. Actually the ICOM A2 supports Wireless lan. As you can see from the below pic which I have already uploaded (Icom A2 connected in my car’s obd slot) with the system light green (turn on – operational) it has 4 lights. One for communication, one for wireless lan, on for LAN (RJ 45) and one for the operation named system. I was wondering if there is some kind of emulator or something to “trick” the interface so it thinks it is connected on an ISIS server even running from VMware.