How to program BMW Diagnostic Software BMW E-sys
1.Connect to BMW car;
2.Read FA,read ecu and Calculate ecu version.(Calculate will take 10 minutes)
3.Select SVT (calculated)
4.Select the ecu to be programmed, check the program file, and click Start to program;(will take 10 minutes or more)
5.Program finished;
6.After programming ecu, you still need to ecu code;
7.Code finished,ecu programming complete.(Tips :If the ecu still does
not work, you need to use the BMW ISTA diagnostic software to check the
fault and check whether the ecu needs to be matched or learned.)
No comments:
Post a Comment